Night Vision

I bought 100 of high-power infrared LEDs, and soldered them onto a circuit board. This is an invisible infrared 'flashlight'. The camera below is extremely sensitive to infrared light. Therefore, with the infrared camera and the flashlight, one can view video in complete darkness, without any visible light. The infrared beam makes a well-defined 5' spot on the wall from 25'.

Jameco #150931
Mfg Ref # 508-EIA
$79.9500

Black and White Low-Light Camera
Sony Chipset
Lens: 3.6mm
Signal to noise ratio: >48dB
Requires 12V power source (not included)
6" (P/N 150931) wires with 4-pin Molex-type keyed connector
EIA system 537(H) x 505(V)
Composite output with 420 line resolution
Shutter speed: 1/60 - 1/1000
FOV: 92.6?
Video output: 1.0Vpp composite video/75 ohms
Size: 1.3"L x 1.3"W x 1.0"H
One-year warranty

Scanning System	EIA
Image Sensor Device	SONY Interline Transfer Hyper HAD CCD
Image Size	1/3" (appprox 4.8mmx3.6mm)
Picture Element (all)	537(h) x 505(v)
(effective)	510(h) x 492(v)
Chip Size	6mm (h) x 4.9mm (v)
Sunchronizing system	Internal sync.
Interlace	2:1 Interlace
Horizontal Resolution	420 TV lines
Video output leve	l 1.0V(p-p) (75 ohms, Composite)
Video S/N Ration	More than 48db (AGC off)
Minimum Illumination (AGC ON)	Scene 0.01 Lux
Electronic Iris	Setting On
Auto Exposure (AE) System Auto Electronic Iris:	1/50(1/60) - 1/100,000 sec
Back Light Compensation	Active Historogram Plus Windows Weight BLC
Gamma	1
Built-In Lens	(Lens Optional)
Enviromental Conditions:
Operating Temperature	15C - 55C
Storage Temperature	-20C to +70C
Audio Output	140mv Vp-p RCA connector
Output Pin	Red: +12V Yellow:Video White Audio Black:Ground
Power Consumption	1.2 W
Dimmensions	32mm x 32mm
Weight	11g

Infrared Emitter Diode
Jameco #133946, Mfg Ref # SLI-0308CP
1+ $0.75, 10+ $0.65, 100+ $0.49, 1K+ $0.39

Use for remote control or fiber optics
Can be used w/cameras (peak emission wavelength 940nm @ If 20mA)

Size: T1 (.12 inch / 3 mm diameter)

Absolute Maximum Ratings (Ta = 25 C)
Characteristic	Symbol	Max	Unit
Power dissipation	PO	200	mW
Continuous Forward Current	IF	100	mA
Reverse Voltage	VR	5	V
Peek Forward Current( 300pps, 1us pulse)	Ipf	1	A
Storage Temperature	Tstg	-20 +80	C
Operating Temperature	Topr	-30 +100	C
Solder Temperature for 3 sec. at 2mm from the reflector edge		260	C

Electro-Optical characteristics (Ta = 25 C)
Characteristic	Symbol	Condition	Typ	Max	Unit
Forward Voltage	VF	IF=50mA	1.3	1.7	V
Reverse Current	IR	VR=5V		10	uA
Luminous Intensity	IV	IF=50mA	4.0		mW/str
Peak Emission Wavelength	??P	IF=20mA	940		nm
Spectral Line Halfwidth	???	IF=20mA	100		nm
Viewing Angle	????	IF=20mA	+-15		Deg
Rise/Fall Time	Tr/Tf	IF=20ma	30/30		nS

Spec Sheet

View this page in: Espanol, Dutch, German, French, Italian, or Portuguese